If you find there is an SDS missing from your Department Please Contact Safety and Compliance to get this resolved.

Danger

EFFECTIVE DATE

2018-04-12

PICTOGRAMS

ESAPCO
Local data

SKU #

*This local data is shared by all revisions

Drummond Prizm PTFE Penetrating Gel Lubricant

Danger 2018-04-12

Hazard Statements

H222 - Extremely flammable aerosol H280 - Contains gas under pressure; may explode if heated H304 - May be fatal if swallowed and enters airways H315 - Causes skin irritation H335 - May cause respiratory irritation H336 - May cause drowsiness or dizziness

Precautionary Statements

P101 - If medical advice is needed, have product container or label at hand P102 - Keep out of reach of children P103 - Read label before use. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 - Do not spray on an open flame or other ignition source P251 - Pressurized container: Do not pierce or burn, even after use P261 - Avoid breathing dust/fume/gas/mist/vapors/spray P264 - Wash skin thoroughly after handling P264 - Wash hands thoroughly after handling P271 - Use only outdoors or in a well-ventilated area P280 - Wear protective gloves P337 + P313 - If eye irritation persists: Get medical advice/attention P302 + P352 - IF ON SKIN: Wash with plenty of soap and water P314 - Get medical advice/attention if you feel unwell. P332 + P313 - If skin irritation occurs: Get medical advice/attention P362 - Take off contaminated clothing and wash before reuse P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing P304 + P312 - IF INHALED: Call a POISON CENTER or doctor if you feel unwell P301 + P310 - IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician P331 - Do NOT induce vomiting P370 + P378 - In case of fire: Use appropriate method to extinguish P390 - Absorb spillage to prevent material damage P391 - Collect spillage P403 + P233 - Store in a well-ventilated place. Keep container tightly closed P405 - Store locked up P410 + P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F P501 - Dispose of contents/ container to an approved waste disposal plant

Manufacturer information

Name

Drummond, A Lawson Brand

Phone

1-866-529-7664

Address

8770 W.Bryn Mawr Ave.- Suite 900
Chicago, 60631

PICTOGRAMS

ESAPCO
Local data

SKU #

*This local data is shared by all revisions