If you find there is an SDS missing from your Department Please Contact Safety and Compliance to get this resolved.

Danger

EFFECTIVE DATE

2017-04-28

PICTOGRAMS

ESAPCO
Local data

SKU #

*This local data is shared by all revisions

3M™ Hi-Strength Spray Adhesive 90

Danger 2017-04-28

Hazard Statements

Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness. May displace oxygen and cause rapid suffocation. Causes damage to organs: cardiovascular system

Precautionary Statements

General: Keep out of reach of children. Prevention: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Do not breathe dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Response: IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF exposed: Call a POISON CENTER or doctor/physician. Specific treatment (see Notes to Physician on this label). Storage: Protect from sunlight. Do not expose to temperatures exceeding 50C/122F. Keep container tightly closed. Store locked up in a well-ventilated place. Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations. Notes to Physician: Exposure may increase myocardial irritability. Do not administer sympathomimetic drugs unless absolutely necessary.

Manufacturer information

Name

3M Industrial Adhesives and Tapes Division

Phone

1-888-364-3577

Address

3M Center
St. Paul, 55144-1000

PICTOGRAMS

ESAPCO
Local data

SKU #

*This local data is shared by all revisions