If you find there is an SDS missing from your Department Please Contact Safety and Compliance to get this resolved.

Danger

EFFECTIVE DATE

2014-11-13

PICTOGRAMS

ESAPCO
Local data

SKU #

*This local data is shared by all revisions

Lock Deicer

Danger 2014-11-13

Hazard Statements

Extremely flammable aerosols. Causes serious eye irritation. May cause drowsiness or dizziness.

Precautionary Statements

General: If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read label before use. Prevention: Keep away from heat, hot surfaces, open flames, sparks. - No smoking. Avoid breathing mist, spray, vapours. Use only outdoors or in a well-ventilated area. Response: IF INHALED: remove victim to fresh air and keep at rest in a position comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. IF EYES IRRITATION PERSISTS: Get medical advice/attention. Storage: Store in a well ventilated place. Store at temperatures not exceeding 50°C/122°F Do not expose to temperatures exceeding 50 °C/122 °F Disposal: Dispose of contents/container to comply with local, state and federal regulations.

Manufacturer information

Name

Bell Automotive Products, Inc.

Phone

8886942355

Address

18940 N. Pima Road, Suite 200
SCOTTSDALE, AZ 85255

PICTOGRAMS

ESAPCO
Local data

SKU #

*This local data is shared by all revisions