|
Lube it All |
Hazard Statements
H222 Extremely flammable aerosol H229 Pressurized container: may burst if heated H280 Contains gas under pressure, may explode if heated H304 May be fatal if swallowed and enters airways H319 Causes serious eye irritation H315 Causes skin irritation
Precautionary Statements
Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn P264 Wash thoroughly after handling P280 Wear protective gloves and eye protection Response: P301+P310 If Swallowed: Immediately call a poison center or doctor P331 Do not induce vomiting P302+P352 If on skin: Wash with plenty of soap and water. P332+P313 If skin irritation occurs: Get medical advice/attention. P362+P264 Take off contaminated clothing and wash it before reuse P305+P351 +P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 If eye irritation persists: Get medical advice/attention P410+P412 +P403 Protect from sunlight. Store in a well ventilated place. Do not expose to temperatures exceeding 50°C/122°F P501 Dispose of contents/container in accordance with local/regional regulations
Manufacturer information
Name
Federal Process Comp.
Phone
1-800-846-7325
Address
4520 Richmond Road
Cleveland, OH 44128
PICTOGRAMS
ESAPCO
Local data
SKU #
