If you find there is an SDS missing from your Department Please Contact Safety and Compliance to get this resolved.

Danger

EFFECTIVE DATE

2017-10-04

PICTOGRAMS

ESAPCO
Local data

SKU #

*This local data is shared by all revisions

Liquid Wrench Penetrating Oil

Danger 2017-10-04

Hazard Statements

Flammable aerosol. Contains gas under pressure; may explode if heated. Harmful if swallowed. May be fatal if swallowed and enters airways. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.

Precautionary Statements

Prevention: Keep away from heat/sparks/open flames/hot surfaces. No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Avoid breathing mist or vapor. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing must not be allowed out of the workplace. Avoid release to the environment. Wear eye protection/face protection. Wear protective gloves. Response: IF SWALLOWED: Immediately call a POISON CENTER/doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Rinse mouth. Do NOT induce vomiting. If on skin: Wash with plenty of water. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a poison center/doctor if you feel unwell. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Collect spillage. Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. HNOC: Combustible.

Manufacturer information

Name

RSC CHEMICAL SOLUTIONS

Phone

704-821-7643

Address

600 Radiator Road
Indian Trail, NC 28079

PICTOGRAMS

ESAPCO
Local data

SKU #

*This local data is shared by all revisions